Threaded Inserts for Wood with External Knife Thread in Brass or Stainless Steel
Threaded inserts for wood with external knife threads provide superior holding power in hard and soft woods, MDF and all wood based products. Use wherever field assembly or disassembly could lead to thread erosion or stripping. The long pilot ensures straight driving into a drilled hole. Sizes available from # 4-40 UN to 3/8" and 3mm to 8mm. You can install with a screwdriver, bolt and locknut, tapping head or with the E-Z Lok driving tool pictured below.
Threaded Inserts for Wood
Hex Drive Die Cast Zinc
An inexpensive threaded insert for wood. Uses are in ready-to-assemble furniture, drawer pulls and wherever easy assembly or avoidance of thread stripping is an issue. Install with a hex key or with the special E-Z Lok drive tool pictured below.
500-4
Finserts for Wood & Thermoplastics
Finserts provide strong metal threads in wood, MDF and other wood based products and are also used in thermoplastics like nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area they provide firm permanent fastening. The fins give higher holding strength in softer materials and help prevent splintering, splitting and thread pullout. Finserts come with one, two or three fins to suit varying thicknesses of material.